0–60 Performance Tools

Published road tests

0–60 Times by Car

Find an identified road test, check how it was timed, and compare the published result with an estimate from weight and horsepower.

Compare model years and trims

These eight results come from the linked Car and Driver instrumented tests. Each row identifies a specific vehicle. Use Load specs to open its weight and power in the 0–60 calculator. You can then apply the published time as a baseline for an upgrade comparison.

Published 0–60 results and calculated estimates
Tested vehiclePublished 0–60Weight / rated powerModel estimateCompare a setup
2015 Ford Mustang GT (manual)Car and Driver4.5 s3,810 lb / 435 hp5.04 sLoad specs
2023 Honda Civic Type R (manual)Car and Driver4.9 s3,183 lb / 315 hp5.53 sLoad specs
2022 Toyota GR86 Premium (manual)Car and Driver5.4 s2,838 lb / 228 hp6.39 sLoad specs
2022 Honda Civic Si (manual)Car and Driver6.8 s2,937 lb / 200 hp7.20 sLoad specs
2025 Honda Civic Sport Touring HybridCar and Driver6.2 s3,225 lb / 200 hp7.73 sLoad specs
2017 Audi A4 2.0T Quattro (automatic)Car and Driver5.2 s3,671 lb / 252 hp7.16 sLoad specs
2021 Audi A4 45 TFSI Quattro (automatic)Car and Driver4.8 s3,705 lb / 261 hp7.02 sLoad specs
2020 Lamborghini Huracán Evo AWDCar and Driver2.5 s3,618 lb / 631 hp3.94 sLoad specs

Data checked November 15, 2026. The calculator column uses our weight and rated-power equation. Test times retain their source’s timing convention.

Why the same car name can have several times

A model name can cover different engines, transmissions, driven wheels, body styles, and years. Match those details before treating a result as representative of your car. A Civic Type R result and a Civic Hybrid result answer different questions, even though both cars carry a Civic badge.

Check the start of the clock

One-foot rollout excludes the time taken to travel the first foot. For tests with a stated rollout duration, the model pages below give that figure. Older reports sometimes omit it. Our 0–60 measurement guide explains how to record a consistent baseline.

Use a published time in a comparison

Start with the stock test that matches your vehicle, load its specs, and choose Use published time as baseline. Enter your proposed power or weight change for each upgrade. The calculator scales the projections to the selected stock result. Check the methodology for the assumptions behind that calibration.

If you already have a measured baseline from your own car, enter that value instead. Use the target 0–60 calculator to solve for power or weight, and use the quarter-mile calculator with total race weight for a drag-strip estimate.

Compare the variants

0–60 times by model