0–60 Performance Tools

Tool 01 Acceleration

0–60 Calculator

Estimate your car’s 0–60 mph time from curb weight and horsepower. Load a published road test or compare two upgrades.

0–60 Calculator controls

Vehicle specs

Input units
lb

Look up curb weight in the manufacturer’s specs for your trim. Exclude occupants and cargo.

hp

Use the manufacturer’s rated engine or system power for your trim.

Optional

Choosing a test fills in its weight and power. You can apply the published time in the upgrade comparison.

Drivetrain context Optional

This is context for interpreting the estimate. The formula uses weight and rated power.

Model output

Estimated 0–60 mph

Enter weight and power to see your estimated time.

Launch, traction, gearing, tires, surface, and timing can change a measured run. About the method

Upgrade planner

Compare two upgrades

Apply each upgrade to the same vehicle. Enter signed power and weight changes, and add costs to compare value.

Current baseline

Enter vehicle weight and power above.

Optional
s

Calibrate to a comparable run using the same launch and timing method, including rollout.

A Upgrade A

Optional
Optional
hp
Optional
lb

Use a minus sign for weight or power removed. Blank changes count as zero.

Optional
USD

Leave blank if unknown. Enter 0 for a free upgrade.

B Upgrade B

Optional
Optional
hp
Optional
lb

Use a minus sign for weight or power removed. Blank changes count as zero.

Optional
USD

Leave blank if unknown. Enter 0 for a free upgrade.

Worked example

From specs to a 0–60 estimate

A hypothetical 3,500 lb car rated at 300 hp has a model estimate of 6.10 s to reach 60 mph.

Adding 30 hp for $1,500 brings the estimate to 5.72 s at $388.09 per 0.10 s saved. Removing 100 lb for $250 gives 5.98 s at $205.81 per 0.10 s saved.

Published 0–60 road tests

Load a vehicle above to compare its published time with the estimate from curb weight and horsepower. The links identify the exact model year, trim, and transmission tested by Car and Driver.

Published results and model estimates to 60 mph
Vehicle and test sourceCurb weight and powerPublished timeModel estimate
2015 Ford Mustang GT (manual)
Rollout duration is unspecified in the published test table.
3,810 lb · 435 hp4.50 s5.04 s
2023 Honda Civic Type R (manual)
The reported time excludes 0.3 s of one-foot rollout.
3,183 lb · 315 hp4.90 s5.53 s
2022 Toyota GR86 Premium (manual)
The reported time excludes 0.3 s of one-foot rollout.
2,838 lb · 228 hp5.40 s6.39 s

Compare more 0–60 times by car, including Civic, Audi A4 and Huracán tests, with links to load their specs into this calculator.

2015 Ford Mustang GT upgrade example

Car and Driver measured 4.50 s for the manual Mustang GT. The weight and power model estimates 5.04 s from its published specs. The projections below use the published stock time as the baseline and a hypothetical $600.00 cost for each option.

Remove 150 lb for a projected 4.39 s and 0.11 s saved. Estimated cost per 0.10 s saved is $535.11.

Add 25 hp for a projected 4.35 s and 0.15 s saved. Estimated cost per 0.10 s saved is $387.64.

The model estimates seconds as 1.8514 + 0.5991 × (curb weight in kg ÷ rated power in kW). When you apply a published time, the calculator scales each upgrade projection by the published time divided by the stock model estimate.

Where do I find curb weight and rated power?

Start with the manufacturer’s specs for your exact model year, trim, engine, and drivetrain. Enter curb weight before adding occupants or cargo. Use rated engine horsepower, or rated system power for a hybrid or EV. For mechanical horsepower, use the hp field. If your spec sheet lists kW, switch to metric and enter that figure directly.

Why might a road test show a different time?

Launch, grip, tires, gearing, surface, and rollout can change the clock. The estimate uses curb weight and rated power. An optional measured run scales both upgrade scenarios by the same factor. That works best when the launch and timing methods are comparable.

How should I compare upgrades?

Enter each scenario against the original vehicle. The estimate uses the final curb weight and rated power in each scenario. You can also check the power or weight needed for a specific time, or compare vehicle specs with the power-to-weight tool.