0–60 Performance Tools

Published road tests

Audi A4 0–60 Times

Compare 2017 Audi A4 2.0T Quattro and 2021 A4 45 TFSI Quattro 0–60 tests. Check model year, rated power, timing, and calculator estimates.

Audi A4 Quattro 0–60 comparison

The linked tests cover two automatic Quattro sedans. Car and Driver recorded 5.2 seconds for the 2017 A4 2.0T and 4.8 seconds for the 2021 A4 45 TFSI. Match the year and power specification before applying a result to an A4 you own or are considering.

Audi A4 Quattro 0–60 tests by model year
Tested vehiclePublished 0–60Weight / rated powerModel estimateCompare a setup
2017 Audi A4 2.0T Quattro (automatic)Car and Driver5.2 s3,671 lb / 252 hp7.16 sLoad specs
2021 Audi A4 45 TFSI Quattro (automatic)Car and Driver4.8 s3,705 lb / 261 hp7.02 sLoad specs

Identify the engine and drivetrain first

“Audi A4 0–60” can refer to several specifications. The two rows above identify rated power as well as model year. An equipment name such as Premium Plus or S line does not, by itself, establish that a car matches the tested powertrain. Check the engine rating, driven wheels, and transmission on the vehicle’s own specification sheet.

Use the linked report to confirm the exact test vehicle. For a different A4, enter its own curb weight and power instead of selecting the closest-looking trim name. The model can compare those inputs consistently even when a matching instrumented test is unavailable.

What explains the calculator gap?

The model column changes only with the ratio of weight to rated power. Both tested vehicles have other characteristics that the equation cannot represent individually, including how the transmission shifts and how the car launches. A model estimate and a published measurement therefore provide two different pieces of information about the same setup.

To explore a proposed tune, load the matching stock test and apply its published time as the baseline. Enter the expected rated-power change in one upgrade scenario. Use the other scenario for a weight change or an alternative power figure. Treat the resulting difference as a projection and verify a completed modification with comparable measurements.

Audi A4 quarter-mile figures

The original reports also list quarter-mile results. The 2017 car completed the distance in 13.9 seconds at 100 mph, while the 2021 car recorded 13.5 seconds at 102 mph. Those are the reports’ measured passes. Our quarter-mile calculator instead asks for total race weight and rated power to estimate ET and trap speed.

Timing and model-year limits

The 2021 report excludes 0.3 seconds of one-foot rollout. The 2017 report does not provide a rollout duration in its results table. That limits an exact comparison between timing conventions. Preserve each report’s label when quoting its result.

These rows describe the identified test cars. They do not cover every A4 engine, body style, transmission, or market specification. If your car differs, use its own inputs and document the timing method of any baseline you supply.

Use the result for your car

Choose the matching model year and trim before loading a test into the 0–60 calculator. Select Use published time as baseline to scale an upgrade comparison to that result. Enter a measured time from your own car if you have a suitable run.

Read our model methodology and timing guide for calibration and rollout assumptions. You can also compare 0–60 times by car or calculate a power-to-weight ratio.